Additional Comments
This Listing is for 2018 Specialized Stumpjumper Pro Carbon 27.5, Large, EAGLE 12s, Roval Travers Carbon 27.5” Wheels. This bike has very low miles is and is in beautiful, excellent working condition. No cracks or damage major scratches for excessive wear. Bike has been very lightly ridden and probably has less than 75 miles on the entire bike.
If you have any additional questions before purchasing or offering on this bike feel free to reach out to me
TECHNICAL SPECIFICATIONS
DRIVETRAIN
CHAIN
SRAM GX Eagle, 12-speed w/ PowerLock
BOTTOM BRACKET
SRAM PF30
CRANKSET
Truvativ Descendant, carbon, Boost™ 148, 170mm crankarm, 30mm spindle
SHIFT LEVERS
SRAM GX Eagle, trigger, 12-speed
CASSETTE
SRAM GX Eagle, 12-speed, 10-50t
CHAINRINGS
32T
REAR DERAILLEUR
SRAM GX Eagle, 12-speed
SUSPENSION
FORK
Öhlins RXF 36, 27.... (read more) 5, Single-Tube design, air spring w/ adjustable 3rd chamber, adjustable low speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 150mm of travel
REAR SHOCK
Custom Öhlins STX, Single-Tube design, Rx Trail Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 197x48mm
WHEELS
FRONT HUB
Specialized, sealed cartridge bearings, 15x110mm spacing, 24h
REAR HUB
DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
INNER TUBES
Standard, Presta valve
SPOKES
DT Swiss Revolution
RIMS
Roval Traverse Carbon 27.5, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built. Rims originally had mint green removable Roval decals. Original owner took them off.
FRONT TIRE
Butcher, GRID casing, Gripton compound, 2Bliss Ready, 27.5 x 2.6”
REAR TIRE
Butcher, GRID casing, Gripton compound, 2Bliss Ready, 27.5 x 2.6"
COCKPIT
SADDLE
Body Geometry Henge Expert, hollow Ti rails, 143mm
SEATPOST
Command Post IRcc, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm of travel
STEM
Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise
HANDLEBARS
Alloy Riser, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 780mm, 31.8mm clamp
GRIPS
RaceFace Lock On
FRONT BRAKE
SRAM Guide RS, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200/180mm rotor
REAR BRAKE
SRAM Guide RS, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180/160mm rotor
ACCESSORIES
FRAMESET
SEAT BINDER
Alloy, 34.9mm
FRAME
S-Works FACT 11m, full carbon chassis and rear end, 27.5 Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, ManFu link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel